What is the capacitor?

-
Image
 The Capacitor.         A capacitor is formed when two conductors, usually of aluminium, are separated by an insulator sus as paper ect. For use in motors the strips are rolled together into a compact unit and placed into a sealed metal or plastic container. This may be either cylinderical or rectangular in shape and may be mounted on, in, or away from the motor. Two terminals or leads are provied for connection. The name capacitor is descriptive of the operation of the device. The capacitor acts essentially as a storage units that is,has capacity to store electricity and provides a leading current to the auxiliary or starting winding. All capacitors have this quality and all are electrically the same;they differ only in mechanical construction.     THE OIL-FILLED CAPACITOR                 This capacitor is used mainly in the permanent-split capacitor motor and for the two-value capacitor motor. The capacitor use an oil-impregnated paper as the dielectric and are permanently conne
Post a Comment

Capacitor motor.

-
Capacitor motors are used only on A.C.      single phase supply. Such motors are
     used for refrigerators, compressure,       cloth washing machines, printing press, drill machines, lathe machines, water pumps and fans etc.

    Parts of capacitor motor:

There are 5 main parts of this motor.
1. Moving part -rotor.
2.Static part- stator.
3.End shields or end covers which is fitted with stator with nut and blots.
4.Centrifugal switch which is fitted inside the motor.
5.Capacitor which is connected in series with the starting winding. Capacitor is mostly fitted with the motor on the top or at one side.

Comments

Post a Comment

Popular posts from this blog

Induction Motor

-
Image
This motor is quite different from a D.C. motor because supply is not given to its rotor (armature) but the e.m.f. is induced in the rotor  when stator is supplied which produces current in the rotor and the motor runs. Thus this motor is called induction motor. Nowadays for each work at each place A.C. single phase or 3phase motor is used. The parts of this motor are as follows:- 1.Stator. 2.Rotor. 3.End cover. 4.Bearing. 5.Fan. 1.Stator: This is made of high silicon steel strips 0.3 to 1.35mm thick combining together which are called laminated strips and combination is called laminated core. The core has open or semi closed slots. In these slots winding is done. This core is fitted in a frame so that any external mechanical injury may not take place and rotor may rotet easily. 2.Rotor: It is also made of high Silicon steel strips 0.3 to 1.35 mm thick combining together. It has closed type slots in which winding is done. The winding is done with thick strips or rods. Nowada
Read more

Star delta starter

-
Image
.This starter is fitted above 5H.P and upto 10H.P. in this starter there is two way switch which connects the 6ends of the motor once in star then in Delta. Like D.O.L.starter it also has overload relay ,no volt coil,current adjuster and "off" switch.    When we operate the handle down it is started, the ends A2,B2,C2,of the motor become short circuited and A1,B1, C1,get the supply. The motor becomes in star and gets 1/√3times or 58% of the full voltage by which the motor takes 1/3r current of that which the motor takes by starting in delta giving full voltage. It dropping of voltage in the line. By decreasing the current the torque of the motor also decreases to 1/3rd of the torque which it will give by direct star in deta. After taking 75% speed when the handle is done on delta, the ends,C1A2,A1B2,B1C2,are short circuited and each joint gets supply which connects the supply in delta and now since the motor is full speed the back e.m.f.is full. The motor is taking full cu
Read more

What is the reason of a motor runs with less than actual speeds?

-
Image
What is the reason of a motor runs with less than actual speed????        Tell the remedies also.    1. Short circuit inrunnig winding: The motor runs slow due to short critics in running winding coils. This motor jamps also. If this motor runs for a long time,it may burn. This fault may be determined by touching with hand or by internal growler. Its coils are to be rewound.   2.  It may be possible that the starting winding is not cut off from the supply and the motor gives humming sound. For this,run the motor leaving the centrifugal switch out of circuit and taking starting winding leads out. If it is running O.K.then change the centrifugal switch or repair it,if possible by giving washer etc.      3. Reverse in running winding,.. It may be possible that the poles of running winding have been reversed when connection of a new winding are done. Check the polarity of poles by compass needle or screw drivers as stated above and correct if wrong.      4.   Faulty capacitor. 
Read more